Online Training

Module 1

DTR - Turns Ratio Meter

1. Introduction to DTR - Turns Ratio Meter;
2. DTR Working Principle;
3. DTR Components and Characteristics;
4. Measurement Procedure with the DTR;
5. Interpretation of Results;
6. Care and Safety when Using DTR;
7. Case Studies and Practical Examples;
8. Conclusion

Module 2

Micro-ohmmeter – Resistance Measurement Contact and Winding Resistance

1. Introduction to the Micro-ohmmeter;
2. Micro-ohmmeter Working Principle;
3. Contact Resistance Measurement;
4. Winding Resistance Measurement;
5. Influences on Resistance Measurement;
6. Interpretation of Results;
7. Safety and Care in Using the Micro-ohmmeter;
8. Case Studies and Practical Examples;
9. Conclusion

Module 3

Megger – Resistance Measurement Isolation

1. Introduction to DTR - Turns Ratio Meter;
2. DTR Working Principle;
3. DTR Components and Characteristics;
4. Measurement Procedure with the DTR;
5. Interpretation of Results;
6. Care and Safety when Using DTR;
7. Case Studies and Practical Examples;
8. Conclusion

Module 4

Current Injection Suitcase – Protection Tests and Relay Calibration

1. Introduction to Current Injection Suitcase;
2. Current Injection Suitcase Working Principle;
3. Current Injection Suitcase Applications;
4. Test Procedure with the Current Injection Suitcase;
5. Types of Tests Performed with Current Injection Suitcase;
6. Interpretation of Results;
7. Factors that Influence Measurement;
8. Safety in Using the Current Injection Suitcase;
9. Case Studies and Practical Examples;
10. Conclusion

Module 5

Oscillography – Recording and Diagnosis of Electrical Events

1. Introduction to Oscillography;
2. Oscillograph Working Principle;
3. Applications of Oscillography;
4. Types of Oscillographs;
5. Measurement Procedure with Oscillograph;
6. Interpretation of Results;
7. Factors Influencing Data Quality
8. Safety in Using the Oscillograph;
9. Case Studies and Practical Examples
10. Conclusion